University of Toronto | Faculty of Applied Science & Engineering

Department of Materials Science & Engineering

Barati, Mansoor

MBaratiMansoor Barati | Associate Professor &
Gerald R. Heffernan Chair in Materials Processing
BSc (Isfahan), MSc (Isfahan), PhD (McMaster), PEng

Office: MB 230
T: 416.978.5637 | E: mansoor.barati@utoronto.ca

Research Group:
Sustainable Materials Processing Research Group

Research Group Website: www.smprl.com

Honours & Awards

The Engineering Medal (Young Engineer Award Category), Professional Engineers Ontario (PEO), 2010

Professional Memberships

Professional Engineers of Ontario
Canadian Institute of Mining, Metallurgy, and Petroleum (CIM)
Iron and Steel Society (ISS)
Association for Iron and Steel Technology (AIST)

Research Areas

Professor Barati’s “Sustainable Materials Processing Research Group” centers around research and development of processes that are less energy intensive and more environmentally friendly. Equally, the research seeks development of materials that promise higher performance, create smaller environmental footprint, and demand less from the earth resources. Several specific research areas are listed below.

Production and Refining of High Quality Metals and Alloys

Synthesizing high quality metals and alloys has been one of the primary research subjects. As an example, an extensive research on refining of solar grade silicon is underway. 

Alternative Metals Processing Routes

One major stream of research in Prof. Barati’s group looks into alternative metal production and refining processes with an emphasis on reducing the energy consumption and environmental impact. For example, the fundamentals and basic process requirements of a novel steelmaking technology that aims continuous operation are being investigated. The process promises to reduce energy consumption and lower greenhouse gas emissions. 

Recycling of Wastes

With societies becoming more consuming, the amount of used goods such as automobiles, electronic devices, batteries, etc is ever increasing. Recycling of such goods and materials is both environmentally justified, also reduces the demand on the earth’s resources. Another line of research looks into the ways of recovering valuable parts of the industrial wastes and converting the irrecoverable wastes into landfill-safe materials. 

Fundamentals of Interactions and Properties in Pyrometallurgical Systems

A stream of research focuses on fundamentals of metallurgical systems such as kinetics of gas-slag-metal interactions, aiming to generate essential knowledge for development of the process discussed above.

Select Publications

J. Li and M. Barati, “Kinetics and Mechanism of Decarburization and Melting of DRI Pellets in Slag” Metall. Mater. Trans. B , vol 40 B, 2008, pp. 17-124

M. Barati and K. Coley, “Electrical and electronic conductivity of FeOx-containing slags at different oxygen potentials, Part II. mechanism and a model for electronic conduction”, Metall. Mater. Trans .B, vol. 37 B, 2006, pp. 51-60

M. Barati and K. Coley, “Mechanism and a comprehensive kinetic model for CO-CO2 reaction with iron oxide containing slags”, Metall. Mater. Trans. B, vol. 37 B, 2006, pp. 61-9

Faculty of Applied Science and Engineering | University of Toronto
Materials Science & Engineering
University of Toronto
Wallberg Building, 184 College Street, Suite 140
Toronto, Ontario • M5S 3E4 • Canada
Prospective Students
Current Students
Faculty + Staff
Alumni + Industry
About Us
News + Events
Research + Safety